Thiết bị điện

Liên kết web

Thiết bị điện

Cảm biến Laser HG-C1030-P

Product code: HG-C1030-P
Giá: Liên hệ
Mô tả: Model: HG-C1030-P Cảm biến laser vị trí, khoảng cách phát hiện 30mm Nguồn gốc: Chính Hãng – Panasonic Bảo hành: 12 tháng Giao hàng toàn quốc
Lượt xem: 206
Mạng xã hội:

HG-C1030-P - Cảm biến laser vị trí,  khoảng cách phát hiện 30mm Nguồn gốc: Chính Hãng – Panasonic

Cảm biến Laser HG-C1030-P

Cảm biến Laser HG-C1030-P

Item Specifications
Product Number HG-C1030-P
Part Number HG-C1030-P
Applicable standard EMC Directive Compliance, FDA Standard
Measurement center distance 30mm 1.181 in
Measuring range ±5mm 0.197 in
Repeatability 10 μm 0.394 mil
Linearity ±0.1%F.S.
Temprerature characteristics 0.03% F.S. /℃
Light source Red semiconductor laser Class 2 (JIS / IEC / GB) / Class II (FDA)(Note)
Max. output: 1mW
emission peak wavelength: 655nm 0.026 mil
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).
Beam diameter ø50 μm 1.969 mil approx.
(Note) This is the size in the measurement center distance. These values were defined by using 1 / e2 (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value.
Supply voltage 12 to 24V DCplus or minus 10% Ripple P-P 10%
Current consumption 40 mA or less (at 24V DC supply voltage)
65 mA or less (at 12V DC supply voltage)
Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 : 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage)
Control output PNP open-collector transistor
- Maximum source current: 50mA
- Applied voltage: 30V DC or less (Between control output to +V)
- Residual voltage: 1.5V or less (At 50mA source current)
- Leakage current: 0.1 mA or less
Control output:Output operation Either Light-ON or Dark-ON
Control output:Short-circuit protection Incorporated (Auto reset type)
Analogue output : Analog voltage output • Output range: 0 to 5 V (at alarm: +5.2 V)
• Output impedance: 100Ω
Analogue output : Analog current output • Output range: 4 to 20mA (at alarm: 0mA)
• Output impedance: 300Ω or less
Note : Analog current output has been added from shipment in August 2016.
Response time Switchable between 1.5 ms / 5 ms / 10 ms
External input PNP non-contact input
- Input conditions
Invalid: 0 to +0.6V DC or Open
Valid: +4 to +V DC
- Input impedance: 10kΩ approx.
Pollution degree 2
Operating altitude 2,000 m 6561.680 ft or less
Protection IP67 (IEC)
Ambient temperature -10 to +45 ℃ -14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉
Ambient humidity 35 to 85% RH, Storage: 35 to 85% RH
Ambient illuminance Incandescent light: 3,000 ℓx or less at the light-receiving face
Vibration resistance 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Cable 5-core composite cable, 2 m 6.5617 ft long
Cable extension Extension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable.
Material Enclosure: Aluminum die-cast
Front cover: Acrylic
Weight Net weight: 35 g approx. (without cable), 85 g approx. (including cable)

CÔNG TY TNHH KỸ THUẬT ETECH VIỆT NAM

Địa chỉ :Số 171 - Ngõ 42 - Thịnh Liệt - Hoàng Mai - Hà Nội

Phone: 094 616 3689

Email: etech6789@gmail.com

Website: https://etechvietnam.com/   HOẶC    http://etechcompany.com.vn/

http://cambienomron.vn/

 

 

Cảm biến Laser HG-C1030-P

Cảm biến Laser HG-C1030-P

Cảm biến Laser HG-C1030-P

Cảm biến Laser HG-C1030-P

Cảm biến Laser HG-C1030-P

Cảm biến Laser HG-C1030-P